Rapid Reclaimer

The Rapid Reclaimer is a reclaiming unit for the recovery of unused concrete. The unit recovers washed out sand, aggregate and grey water and is capable of processing up to 20m3 of slurried concrete.

FEATURES
- One part, rugged, all-welded mild steel fabrication.
- Integral control panel
- Overload protection

Features
FRAME
One part, rugged, all-welded mild steel fabrication of rectangular box section and mild steel plate. Complete with tray feeder plate and safety guards.
DRUM SCREEN
Steel wire mesh supported by a steel frame. The drum is 1.3m diameter x 2.7m long and is powered by a hydraulic motor and gearbox drive.
WASHING SYSTEM
By water jets at fixed positions including fi¬nal rinsing of sand in the dewatering screws and of aggregates on the aggregate con¬veyor.
SAND SCREW
2No 400mm diameter de-watering sand screws fitted with geared hydraulic drives.
AGGREGATE CONVEYOR
Channel section with head drum powered by hydraulic geared motor.
WATER GIRAFFES
Twin water giraffes to load recycled/ clean water into truck mixers before cleaning.
POWER UNIT
Electric motor 7.5 kW (10HP) coupled with hydraulic pumps to drive the drum screen, sand screws and conveyors, controlled with a safety relief valve.
OUTPUT
This machine will process up to 20 m3 per hour of slurried concrete. (Assuming continuous feed of materials).
CONTROLS
Integral control panel housing control all valves etc. providing start stop and emergency stop buttons to each side of the Reclaimer unit.
OVERLOAD
The system incorporates an overload automatic shut off valve which will close down the feed to the machine when the machine is overloading. When this happens the feed to the machine will be automatically increased again as the surge of materials gets processed.